¡¾Care about Healthy¡¿Comply with RoHS standard and made of recyclable material to protect your health and earth.
¡¾Sturdy Bend Restrictors¡¿Heavy-duty bend restrictors on both ends,?ensure the higher pressure capability,?NON LEAK
¡¾Extremely Flexible¡¿Upgrade from New development softens layer ,high-density material, more flexible,?easier to drag, drop and roll up.
¡¾Higher Grade Solid Brass¡¿Higher grade?SOLID BRASS?with better Rust-Resistance.Heavy-duty 100% Plastic holder, more durable and easy to load/unload.
¡¾Faster Load $ Unload¡¿Come with USA standard 3/8¡± quick connect and M22-14mm extension couplers£¬make your?setup?more easy and save your time.
¡¾Better Kink Resistant¡¿Pressure Washer Hose with smaller bending radius, could keep pressure performance without pressure loss. And non kink point provide more durable lifetime without burst.
PRESSURE WASHER PUMPS:
1. What pump do I need?
Share the OEM part number of the original pump and pressure washer brand with us, YAMATIC will confirm that for you.
2. How to install the pump?
Please check the video of the product above this page, it shows how to install a pump correctly.
3. Why Engine losing pressure?
The engine/motor hasn't enough power for the pump, try to adjust the pressure of the pump to fit your engine closer.
4. Do I need to add extra oil?
No, it is pre-filled with oil inside and has a double seal system.
5. Do I need to replace the oil?
No, it is designed for lifetime running, and no need to replace it.
1. How to use Snow Foam Lance correctly :
1). Fill the bottle with hot/warm water before adding soap. This helps your solution mix together.
2). Adjust the spray nozzle first to find the stream of water that works for you so that it sprays in a decent fan pattern.
3). Adjust the knob on the top to control how much water is mixed in. The minus (-) sign indicates less water (so more foam is produced), and the (+) indicates more water (so less foam is produced). DO NOT max out the knob onto the (-) side otherwise, you won't get much foam. You can turn it all the way to the (-) and then dial it back a little, this produced a ton of foam.
How to get support & service?
Email the YAMATIC team to get the OEM support, replacement or refund if you have any trouble.