YAMATIC Pressure Washer Adjustable Chemical Injector Kit
- Max pressure: 4500 PSI
- Flow rate: 2 GPM to 5 GPM
- Connector: 3/8’’ Quick Connect
- Control metering valve to adjust dilution ratio of chemical and water
- Increase the efficiency of your high pressure washers
- Used for Cold or Hot Water
- Must work with black soap nozzle which attached to pressure washer gun or wand.
- To get the flow established you will need to make sure the soap is thin, like water.
- Plugged Orifice in Body: Remove the chemical injector and clean or soak in warm water.
- Plugged Filter: Replace or soak in warm water to clean.
- No chemical flow: You may need to lift the chemical container to the same level or a little above the pressure washer to let gravity help you establish the siphon. Once it's started you can put the chemical container back on the ground if you keep losing the siphon, letting the container sit on a box to lift it a bit help.
|Item Weight||14 ounces|
|Package Dimensions||7.24 x 5.59 x 1.97 inches|
|Size||3/8 Quick Connect|
|Power Source||Gas Powered|
|Flow Rate||5 Gallons Per Minute|