YAMATIC 7/8" Shaft Vertical Pressure Washer Pump With Spray Nozzle Tips
Endless Power Washing
2500 PSI @ 2.0 GPM: Direct drive vertical axial pump fits vertical 7/8" shaft power washer, and most vertical engine at 5.5 ~ 6.5 hp (160 ~ 180cc).
3000 PSI @ 2.5 GPM: Direct drive vertical axial pump fits vertical 7/8" shaft power washer, and most vertical engine at 6.5 ~ 7 hp (180 ~ 196cc).
Paired with 5 color spray nozzle tips for better cleaning performance.
NOTE: This pump will not fit the pressure washer with the idle down feature.
- Vertical 7/8" Shaft
- Working Pressure: 2600 to 3000 PSI 2.5 GPM; 2200 to 2500 PSI 2.0 GPM
- 120 hours Running Time
- Easy Start Model
- Measurement: From the main center shaft to each mounting bolt is 4 inches, From center to center spacing between mounting bolts is 7 and 11/16 inches, 6 and 3/16 inches, 6, and 7/16 inches.
Compatible with 7/8" Vertical Shaft pressure washer pumps & Engine Up to 2500 PSI, Rear Outlet
ANNOVI REVERBERI: SRMW22G26-EZ-SX
Troy-Bilt: 020245, 020245-0, 020245-1, 020441-0, 020344-0, 020344-1, 020344-2, 020293, 020293-0, 020293-1, 020207, 020207-1
Craftsman: 580.752500, 580.752501, 580.752192, 580.752050, 580.752051, 580.752052, 580.752960, 580.752880, 580.75491
Homelite: 308653052, 308653058, 308653093, 308653036, 308653078, 308653008, 308653035, 308653026, UT80993A, UT80911A, UT80709A
PowerStroke: 308653045, 308653025, 308653006, PS80943, PS282411, PS80944, PS80946, PS262311, PS80931
Briggs & Stratton: 200303gs, 209261gs, 311553gs, 020441-0
Ryobi: RY802723, RY802900, RY802800, RY8C2700, RY802700A
Black Max: BM80919A
And many other brand & models between 2200-2500 PSI pressure.
Compatible with 7/8" Vertical Shaft pressure washer pumps & Engine Up to 3000 PSI, Rear Outlet
Homelite: 308653052, 308653006, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058, 308653045, 308653025, UT80993, UT80709, UT80911, UT80993A, UT80911A, UT80709A, UT80993F, HLCA80710.
Ryobi: RY80930, RY802900, RY802800, RY802723, RY8C2700, RY802700A.
PowerStroke: PS80944, PS80946, PS80979, PS80945, PS80931, PS80950.
Craftsman: 580.752960, 580.752052, 580.752191, 580.752880.
Husky: HU80709, HU80911, HU80709A, HU80911A, HUCA80709A.
Briggs & Stratton: 311553gs, 020441-0, 020442-0.
Simpson: ms60773, msv3024.
And many other brand & models between 2600-3000 PSI pressure.
NOTE: As this pump won't necessarily fit every model, Please do check the Installation dimensions or confirm with us.
PRESSURE WASHER PUMPS:
1. What pump do I need?
Share the OEM part number of the original pump and pressure washer brand with us, YAMATIC will confirm that for you.
2. How to install the pump?
Please check the video of the product above this page, it shows how to install a pump correctly.
3. Why Engine losing pressure?
The engine/motor hasn't enough power for the pump, try to adjust the pressure of the pump to fit your engine closer.
4. Do I need to add extra oil?
No, it is pre-filled with oil inside and has a double seal system.
5. Do I need to replace the oil?
No, it is designed for lifetime running, and no need to replace it.
1. How to use Snow Foam Lance correctly :
1). Fill the bottle with hot/warm water before adding soap. This helps your solution mix together.
2). Adjust the spray nozzle first to find the stream of water that works for you so that it sprays in a decent fan pattern.
3). Adjust the knob on the top to control how much water is mixed in. The minus (-) sign indicates less water (so more foam is produced), and the (+) indicates more water (so less foam is produced). DO NOT max out the knob onto the (-) side otherwise, you won't get much foam. You can turn it all the way to the (-) and then dial it back a little, this produced a ton of foam.
How to get support & service?
Email the YAMATIC team to get the OEM support, replacement or refund if you have any trouble.