YAMATIC Professional Vertical 7/8" Shaft Pressure Washer Pump, Rear Outlet
Endless Power Washing
Direct drive vertical axial pump fits vertical 7/8" shaft power washer, and most vertical engine at 6.5 ~ 7 hp (208 ~ 220cc), Rear Outlet.NOTE:
This pump will not fit pressure washer with idle down feature
- Brass Head Professional Version
- Vertical 7/8" Shaft (Rear Outlet)
- Easy Start Model
- Max 200 hours Running Time
- Working Pressure: 2900 to 3200 PSI 2.5GPM
- From the main center shaft to each mounting bolt is 4 inches, From center to center spacing between mounting bolts is 7 and 11/16 inches, 6 and 3/16 inches, 6, and 7/16 inches.
Compatible with 7/8" Vertical Shaft pressure washer pumps & Engine Up to 3300 PSI, Rear Outlet
Homelite: UT80432A, UT80432, UT80993, (please know that it may require spacers / longer bolts to mount the pump to the engine)
Black Max: BM80913A, BM80913
PowerStroke: PS80944, PS80979, PS80945, PS80950
Troy Bilt: 020207, 020375
As this pump won't necessarily fit every model, Please do check the Installation dimensions or confirm with us.
PRESSURE WASHER PUMPS:
1. What pump do I need?
Share the OEM part number of the original pump and pressure washer brand with us, YAMATIC will confirm that for you.
2. How to install the pump?
Please check the video of the product above this page, it shows how to install a pump correctly.
3. Why Engine losing pressure?
The engine/motor hasn't enough power for the pump, try to adjust the pressure of the pump to fit your engine closer.
4. Do I need to add extra oil?
No, it is pre-filled with oil inside and has a double seal system.
5. Do I need to replace the oil?
No, it is designed for lifetime running, and no need to replace it.
1. How to use Snow Foam Lance correctly :
1). Fill the bottle with hot/warm water before adding soap. This helps your solution mix together.
2). Adjust the spray nozzle first to find the stream of water that works for you so that it sprays in a decent fan pattern.
3). Adjust the knob on the top to control how much water is mixed in. The minus (-) sign indicates less water (so more foam is produced), and the (+) indicates more water (so less foam is produced). DO NOT max out the knob onto the (-) side otherwise, you won't get much foam. You can turn it all the way to the (-) and then dial it back a little, this produced a ton of foam.
How to get support & service?
Email the YAMATIC team to get the OEM support, replacement or refund if you have any trouble.