??Universal Thermal Release Valve??Made of solid brass, with better air tightness and corrosion resistance. Compatible with all Axial Cam Pumps, such as Honda, Generac, Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Himore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS, and B3090GS.
??Standard 1/4" NPT Fitting??The outside diameter of the male thread is 0.54 inches. Include 2 pieces of the pressure washer replacement thermal release valve.
??Prevent Overheating??The thermal relief valve will open to release hot water and allow cold water to enter the pump. Keep the pump to operate at a safe temperature.
??Safty??Come with a protective cap to provide the high-pressure water from spattering directly and protect your safety.
??OEM Support ??20 years OEM Technical Support with 7X24 customer service. If you need any help, please feel free to contact us at any time.
PRESSURE WASHER PUMPS:
1. What pump do I need?
Share the OEM part number of the original pump and pressure washer brand with us, YAMATIC will confirm that for you.
2. How to install the pump?
Please check the video of the product above this page, it shows how to install a pump correctly.
3. Why Engine losing pressure?
The engine/motor hasn't enough power for the pump, try to adjust the pressure of the pump to fit your engine closer.
4. Do I need to add extra oil?
No, it is pre-filled with oil inside and has a double seal system.
5. Do I need to replace the oil?
No, it is designed for lifetime running, and no need to replace it.
1. How to use Snow Foam Lance correctly :
1). Fill the bottle with hot/warm water before adding soap. This helps your solution mix together.
2). Adjust the spray nozzle first to find the stream of water that works for you so that it sprays in a decent fan pattern.
3). Adjust the knob on the top to control how much water is mixed in. The minus (-) sign indicates less water (so more foam is produced), and the (+) indicates more water (so less foam is produced). DO NOT max out the knob onto the (-) side otherwise, you won't get much foam. You can turn it all the way to the (-) and then dial it back a little, this produced a ton of foam.
How to get support & service?
Email the YAMATIC team to get the OEM support, replacement or refund if you have any trouble.